RX4 Chest and Arms
RX4 Chest Tech


AXYFLEX+

Maximum coverage and protection. HyperComp cap with X-Foam reinforcement creates a bridge preventing elbow floaters from contacting the arm on heavy impacts. Internal elbow bar provides stability for enhanced rebound control.


SHOCKSHIELD DESIGN

Ultimate bicep and forearm protection.


SHOCKSHIELD FLOATERS

Squared off for additional coverage. Reinforced internally with HyperComp for extra protection and stiffness against impacts.

ADJUSTABILITY

Easily adjustable lace-in-arms. Removable front/side chest pad extensions for optimum pant integration. Velcro adjustment settings for backplate positioning and rib attachment. Removable RVH wrist protection padding.


  • Side Velcro attachment
  • Easy adjustment lace-in-arm
  • removable front/side chest pad extensions
  • Adjustable backplate settings
RX4 Chest
RX4 Chest
RV3 Stick
RV3 Shaft

MINIMUS CARBON 25

This carbon weave is flat, spread-tow material that optimizes strength by reducing fiber crimp and deformation in the composite layering. This weave is light and extremely strong and resistant to impacts.

 

MID-FLEX PROFILE

Increases power for hard tape-to-tape passes and long-distance plays to clear the defensive zone. 


VIBEXLITE

Vibration reduction technology improves blocker hand feel on heavy puck impacts.


SLIDEGRIP TECHNOLOGY

SlideGrip Technology provides grip to securely hold the stick while enhancing quick sliding blocker transitions for pokechecks and passing positions. HiFused Construction creates neutral balance for optimum feel.


IMPACT FIBER LAYER SHAFT

Additional layer of carbon on the top, bottom and front face of the shaft for enhanced shaft durability against high impacts. 

RV3 Shaft
RV3 Stick
RG6 Glove
RG6 Trapper

R/G6

  • Dimensions extend at the thumb to enhance a wider catching shape
  • CoverEDGE+ face forward design positions the trapper towards the puck for improved coverage
  • AxyFlex tee construction increases stopping power to direct pucks into the pocket
  • Index to mid-thumb closure
  • 3-D molded backhand construction for extra protection in RVH and while covering the puck
  • Removable liner in 75 degree finger positioning (INT 75, SR 60, SR 90 liners available)
  • Single tee pocket - stock

R/G6.1

  • Dimensions extend at the fingers to enhance a longer catching shape
  • CoverEDGE+ face forward design positions the trapper towards the puck for improved coverage
  • AxyFlex tee construction increases stopping power to direct pucks into the pocket
  • Index to low-thumb closure
  • 3-D molded backhand construction for extra protection in RVH and while covering the puck
  • 75 degree sewn in finger position
  • Double tee pocket - stock
RG6.1 Catch Glove Tech
RG6 Trapper
RG6 Trapper
RG6 Leg Pads
RG6 Airslide Technology



AIRSLIDE 3.0

  • Polycarbonate knee plate provides maximum slide
  • Engineered channels decrease friction by reducing surface area that contacts the ice
  • Orientation of channels set to optimal trajectory for sliding on rough ice

COVEREDGE+

Applies a face-forward design that adds a new dimension to maximizing your coverage in net. By bringing the face of each piece of G6 gear forward, the angle to the puck is further cut down, allowing you to get a piece of pucks that would just miss more conventionally designed gear.


TECHNOLOGY

  • Reinforced outer roll prevents pucks from skipping over the pad
  • Contoured shin channel increases connectivity and control of the pad
  • Adjustable tension top calf strap allows the pad to sit higher on the leg
  • 360 TriFit leg channel for tighter or looser leg channel settings
  • Adjustable tension Active Response toe & heel straps for desired feel
RG6 Coveredge+
RG6 Leg Pads
RG6 Leg Pads
RG6 Blocker
RG6 Blocker Tech

R/G6

  • 20 degree board shape improves rebound speed
  • CoverEDGE+ face forward design positions the blocker towards the puck for improved coverage
  • HyperComp reinforced construction for fast rebounds and better longevity
  • Full range-of-motion finger guards for optimum protection, feel and flush paddle down seal to the ice
  • X-Foam index finger guard for additional fingertip protection
  • Adjustable open cuff design for added wrist mobility
  • Removable palm for customizable fit, feel and board positioning

R/G6.1

  • 35 degree board shape improves rebound control
  • CoverEDGE+ face forward design positions the blocker towards the puck for improved coverage
  • HyperComp reinforced construction for fast rebounds and better longevity
  • Full range-of-motion finger guards for optimum protection, feel and flush paddle down seal to the ice
  • X-Foam index finger guard for additional fingertip protection
  • Adjustable open cuff design for added wrist mobility
  • Non-removable palm
RG6.1 Blocker
RG6.1 Blocker Tech
RG6 Blocker
RF2
Foam

X FOAM

OUR MOST ADVANCED IMPACT ABSORBING FOAM PROVIDES A TARGETED BARRIER ON IMPACTS TO THE FOREHEAD AND WORKS IN CONJUNCTION WITH THE OUTER SHELL TO PROTECT AGAINST INJURY.

IMPAX FOAM

DUAL DENSITIES OF OUR PREMIUM IMPACT ABSORBING FOAM PROVIDE THE OPTIMAL BALANCE OF PROTECTION, COMFORT AND WEIGHT REDUCTION.

FANTOM FIT

ULTIMATE COMFORT ACHIEVED THROUGH OPTIMUM FIT CHARACTERISTICS.

OMNISHOCK+ SYSTEM

A HOLISTIC APPROACH TO HEAD PROTECTION FOCUSED ON SAFETY FIRST. ALL SHELL AND LINER COMPOSITIONS ARE INTEGRATED BY DESIGN. A COMBINATION OF X FOAM AND DUAL-DENSITY MOLDED IMPAX FOAMS, THE OMNISHOCK+ DESIGN PROVIDES ULTIMATE PROTECTION AGAINST PUCK IMPACTS AND COLLISIONS WITHIN THE CREASE.

CHIN MOBILITY

THE R/F2 CHIN MAXIMIZES MOBILITY WITHOUT SACRIFICING PROTECTION SO THE GOALIE CAN EFFICIENTLY MOVE THEIR HEAD WITH MINIMAL CHEST PROTECTOR INTERFERENCE. THIS MAKES TRACKING PUCKS INTO THE BODY AND WATCHING PLAYS BEHIND THE NET EFFORTLESS.

Certified Cat Eye
Certified Cat Eye
Non-Certified Cat Eye